New & Improved!

Now featuring our new "Foreverwear Finish" which provides longer unit life.

Add flair to nameplates, signs, trophy plaques & more!

If you have materials requiring Rounding, Notching, Scalloping, Slotting or Piercing then these are the tools you will want!

Choose from our standard base, which accepts all but our largest punches, or our large base, which accepts them all.

Electric Corner Shaper

Need A More Powerful Solution?

For easier use and greater productivity on high-volume punching, try an Electric Corner Shaper, with variable speed motor. Just set the motor speed, and you can slide your pieces right in.

Specifications

	Standard Base	Large Base	Electric Base
Dimensions :	9½" x 6" x 4½" H	11¾" x 8" x 5½" H	10" x 6¾" x 9" H
Weight :	3 lbs.	4.25 lbs.	13 lbs.
Materials :	Aluminum with Foreverwear Finish
Max. Stock Thickness :	Brass - 0.030" Aluminum - 0.040" Steel - 0.015" Plastic - 0.063"	Brass - 0.030" Aluminum - 0.040" Steel - 0.015" Plastic - 0.063"	Brass - 0.030" Aluminum - 0.040" Steel - 0.015" Plastic - 0.063"
Additional :		Includes adapter plate for using standard sized punches	110V Geared Motor (providing 100 in.-lb. torque) Speed variable between 0 and 21 punches per minute

Punch Shapes & Sizes Available

	1/8	3/16	1/4	5/16	3/8	1/2	5/8	3/4	1"
Radius (R)	*	*	*	*	*	*	L	L	L
Notch (N)	*		*		*	*
Ornamental (O)					*	*	*
Step (P)			*		*
Decorative (D)					*	*	*
Scallop (S)			*		*	*

Hole and Slot punches also available

( * denotes standard size punch, "L" denotes large punch)

Table Shear Types

For Cutting Metal or Plastic

Design Specifications

Overall Table Dimensions : 25" L x 14" W x 11" H
Table Weight : 30 lbs.
Materials : Aluminum with Hardcoat Finish and Steel
Maximum Stock Width : 12"

Our table shears can be fitted with two different blade types, depending on your cutting needs.

Metal Blade Cuts Thicknesses:
- Brass - up to 0.025"
- Aluminum - up to 0.050"
- Steel - up to 0.025
Plastic Blade Cuts Thicknesses :
- Flexible Plastic - up to 0.063"
- (NOT rigid plastics or phenolic)
Both Plastic and Metal Shears use the same sturdy Lower Blade